CJP-40 & 41 ~ 15/25kV 200/600A Multipoint
Both the CJP-40 and CJP-41 three phase direct buried cable junction pedestal are made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 200/600A 15/25 kV 2/3/4/5-Way Multipoint junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
Our three phase direct buried CJP-40 & CJP-41 multipoint cable junction pedestal that come with (9) Adj SS parking stands either above (CJP-40) or below (CJP-41) are available in the following configurations/options;
-
-
- Heights – 41”, 50”, & 56″
- Top Depth – 32″
- Top Width – 69″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Parking Stands – (6) Adj SS parking stands above (CJP-40) or melow (CJP-41) junctions
- Optional Junctions – (3) 2/3/4/5-Way 200/600A, 15/25kV Multipoint junctions
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
-
Drawings ~ Single or Three Phase Multipoint Cable Junction Pedestals
Below are a few examples. Drawings (PDF Files) can be downloaded by click the individual model part number.
📞 Contact our sales department for special requirements or custom configurations
| Drawings | Type | Amps | Voltage | MP Junctions | Stands | Height | Top - W & D |
|---|---|---|---|---|---|---|---|
| CJP-43-56-3345 | Direct Buried | 600A | 15/25KV | 4"(2/3/4/5-WAY) | Slant | 56" | W-69" D-32" |
Videos ~ Cable Junction Pedestal
Below are links to product, repair, & instructional videos for the pedestals that are on our Vimeo channel. Please check back as we continue to add additional valuable information.
Specifications & Resources ~ Cable Junctions Pedestals
Below are links to sample specifications for the pedestals along with resource material that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications:
- Certification of Conformance with IEEE C57.12.28 for Cable Junction Pedestals
- Sample Cable Junction Pedestal Specification sheet.
Resource Materials:
Quote Request ~ Multipoint Pedestals
Design your cable junction pedestal with multipoint junctions by completing the form below with as much information as you can and submit it to our sales department. Both our multipoint direct buried & pad mount cable junction pedestals are made with fire retardant fiberglass and protected with UV stabilized gel coat. Optional 200/600A 15/25/35kV 2/3/4/5/6-way multipoint junctions & copper ground bar are offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard. A sales representative will review your request and contact you if there are any questions. Else wise, a sales representative will email you a quote in the next few days.