CJP-31D ~ 35kV 600/900A
Both the CJP-31D three phase direct buried cable junction pedestal and CJP-31D mounting base is made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 600/900A 35 kV 2/3-Way Cooper junctions with 6″ centers or 2/3/4-Way Elastimold junctions with 4″ centers are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
The three phase direct buried CJP-31D cable junction pedestal is designed for the Windfarm/Solar markets and is available in the following configurations/options;
- Design – Direct Buried
- Heights – 41”, 50”, & 56”
- Top Depth – 32″
- Top Width – 55″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Parking Stands – (6) Adj SS parking stands below junctions
- Optional Elastimold Junctions – 2/3/4-Way, 600A, or 900A, 150kv or 200kV Bil, 35kV with 4″ Centers (Dwgs # 3333 & 3335 )
- Optional Cooper Junctions – 2/3-Way, 600A, or 900A, 150kv or 200kV Bil, 35kV with 6″ Centers (Dwgs #3334 & 3336 )
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
- Optional Extension Sleeves – 18″H (Dwg # 3333 &3334) or 34″H (Dwgs # 3335 & 3336))
- Optional Cable Support – Stainless Steel Unistrut
- Optional Cable Clamps – Stainless Camps available in various diameters
Drawings ~ Three Phase Renewable Cable Junction Pedestal
Below are a few examples including our standard table drawings. Drawings (PDF Files) can be downloaded by click the individual model part number.
📞 Contact our sales department for special requirements or custom configurations
| Drawings | Phase | Amps | Voltage | Junctions | Stands | Bases (18" or 34"H) | Top - W & D |
|---|---|---|---|---|---|---|---|
| CJP-35/B-56-3395 | 3 | 600A | 35KV | 4" (2/3/4-WAY) | BELOW | 34" H | W-62" D-32" |
| CJP-35/B-56-3393 | 3 | 600A | 35KV | 4" (2/3/4-WAY) | BELOW | 18" H | W-62" D-32" |
| CJP-35/B-56-3396 | 3 | 600A | 35KV | 6" (2/3-WAY) | BELOW | 34" H | W-62" D-32" |
| CJP-35/B-56-3394 | 3 | 600A | 35KV | 6" (2/3-WAY) | BELOW | 18" H | W-62" D-32" |
| CJP-31D-56-3335 | 3 | 600A | 35KV | 4" (2/3-WAY) | BELOW | 34" H | W-55" D-32" |
| CJP-31D-56-3333 | 3 | 600A | 35KV | 4" (2/3-WAY) | BELOW | 18" H | W-55" D-32" |
| CJP-31D-56-3336 | 3 | 600A | 35KV | 6" (2/3-WAY) | BELOW | 34" H | W-55" D-32" |
| CJP-31D-56-3334 | 3 | 600A | 35KV | 6" (2/3-WAY) | BELOW | 18" H | W-55" D-32" |
| CJP-41-56-3399 | 3 | 600A | 35KV | 4" (2/3/4-WAY) | BELOW | 34" H | W-69" D-32" |
| CJP-41-56-3397 | 3 | 600A | 35KV | 4" (2/3/4-WAY) | BELOW | 18" H | W-69" D-32" |
Videos ~ Cable Junction Pedestal
Below are links to product, repair, & instructional videos for the pedestals that are on our Vimeo channel. Please check back as we continue to add additional valuable information.
Specifications & Resources ~ Cable Junctions Pedestals
Below are links to sample specifications for the pedestals along with resource material that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications:
- Certification of Conformance with IEEE C57.12.28 for Cable Junction Pedestals
- Sample Cable Junction Pedestal Specification sheet.
Resource Materials:
Quote Request ~ Renewable Market
Design your own single, two, three phase cable junction pedestal by completing the form below with as much information as you can and submit it to our sales department. Both our direct buried & pad mount cable junction pedestals are made with fire retardant fiberglass and protected with UV stabilized gel coat. Optional 200A/600/900A 15/25/35kV 2/3/4-way junctions are & copper ground bar are offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard. A sales representative will review your request and contact you if there are any questions. Else wise, a sales representative will email you a quote in the next few days.